top of page

Partnering Businesses

Public·13 friends

Linux Nxd 7.5 Setup: Tips and Tricks for Optimizing Performance


Linux Nxd 7.5 Setup: A Complete Guide




Linux Nxd 7.5 is a terminal server software that allows you to access remote desktops and applications from any device and browser. It is based on NoMachine technology, which provides high-performance, secure and easy-to-use remote access solutions. In this article, we will show you how to install and configure Linux Nxd 7.5 on your Linux server and connect to it from your clients.




linux nxd 7.5 setup



How to Install Linux Nxd 7.5 on Linux Server




Before you install Linux Nxd 7.5, you need to make sure that your Linux server meets the following prerequisites:


  • A supported Linux distribution (such as CentOS, Debian, Fedora, Red Hat, SUSE or Ubuntu)



  • A valid license key for Linux Nxd 7.5 (you can request a free trial from NoMachine website)



  • A network connection between the server and the clients



  • A web server (such as Apache or Nginx) to host the web sessions (optional)



Once you have the prerequisites ready, you can download the Linux Nxd 7.5 package from NoMachine download page. You can choose between RPM, DEB or TAR.GZ packages depending on your Linux distribution.


After downloading the package, you can install it using the following commands:


# For RPM packages


sudo rpm -ivh nomachine-terminal-server-7.5.x-x86_64.rpm


# For DEB packages


sudo dpkg -i nomachine-terminal-server_7.5.x_amd64.deb


# For TAR.GZ packages


tar zxvf nomachine-terminal-server-7.5.x-x86_64.tar.gz


cd nomachine-terminal-server-7.5.x-x86_64


sudo ./install


The installation process will ask you some questions about the configuration of the terminal server, such as the port number, the authentication method and the license key. You can accept the default values or change them according to your preferences.


After the installation is completed, you can activate the license key by running the following command:


sudo /usr/NX/bin/nxserver --activate LICENSE-KEY


Replace LICENSE-KEY with your actual license key.


How to Connect to Linux Nxd 7.5 from Clients




There are two ways to connect to Linux Nxd 7.5 from your clients: by browsers or by NoMachine client.


Connecting by Browsers via Terminal Server Web Tools




If you have installed a web server on your Linux server, you can use the Terminal Server Web Tools to access your remote desktops and applications from any browser that supports HTML5 and WebRTC technologies.


To connect by browsers, you need to do the following steps:


  • Open your browser and go to http://SERVER-IP:4080/nxwebplayer/, where SERVER-IP is the IP address of your Linux server.



  • Enter your username and password for the Linux server and click Login.



  • Select a desktop or an application from the list of available sessions and click Connect.



  • Enjoy your remote session in your browser.



You can also customize your web session settings, such as the resolution, the audio quality and the keyboard layout, by clicking on the gear icon in the top right corner of the web player.


Connecting by NoMachine Client




If you prefer to use a dedicated client software for your remote access, you can download and install the NoMachine client from NoMachine download page. The NoMachine client is available for Windows, Mac OS X, Linux, Android and iOS platforms.


To connect by NoMachine client, you need to do the following steps:


  • Open the NoMachine client and click on New Connection.



  • Select NX as the protocol and enter SERVER-IP as the host name, where SERVER-IP is the IP address of your Linux server.



  • Enter your username and password for the Linux server and click Next.



  • Select a desktop or an application from the list of available sessions and click Done.



  • Double-click on the connection icon and enjoy your remote session in the NoMachine client.



You can also customize your client session settings, such as the display mode, the audio quality and the keyboard layout, by clicking on the menu icon in the top left corner of the client window.


Conclusion




In this article, we have shown you how to install and configure Linux Nxd 7.5 on your Linux server and connect to it from your clients by browsers or by NoMachine client. Linux Nxd 7.5 is a powerful and easy-to-use terminal server software that enables you to access remote desktops and applications from any device and browser. It is based on NoMachine technology, which provides high-performance, secure and easy-to-use remote access solutions.


If you want to learn more about Linux Nxd 7.5 features and functionalities, you can visit NoMachine Terminal Server product page or NoMachine documentation page.


How to Manage and Optimize Linux Nxd 7.5 Terminal Server




After you have installed and configured Linux Nxd 7.5 on your Linux server and connected to it from your clients, you may want to manage and optimize your terminal server settings and performance. Linux Nxd 7.5 provides several tools and options for this purpose.


How to Manage Server Services




Linux Nxd 7.5 runs several services by default, such as the nxserver, nxnode, nxclient and nxwebplayer services. You can manage these services from the "Server Services" console, which you can access by running the following command:


sudo /usr/NX/bin/nxserver --services


From the "Server Services" console, you can start, stop, restart, enable or disable any of the services. You can also view the status and logs of the services.


How to Configure Web Sessions




If you have installed a web server on your Linux server, you can configure your web sessions settings from the "Web Sessions" console, which you can access by running the following command:


sudo /usr/NX/bin/nxserver --web


From the "Web Sessions" console, you can configure various aspects of your web sessions, such as:


  • The section server settings, which control how the web player connects to the terminal server.



  • The tutorial wizard settings, which control whether to show or hide the tutorial wizard at web session startup.



  • The web server settings, which control how to start and stop the web server and which ports to listen on.



  • The WebRTC settings, which enable or disable the use of WebRTC technology for real-time web communication.



  • The video streaming encoding settings, which control how to encode and compress the video stream in web sessions.



How to Optimize Performance




Linux Nxd 7.5 provides several options and techniques to optimize the performance of your remote sessions, such as:


  • The compression level settings, which control how much data is compressed before being sent over the network.



  • The quality level settings, which control how much image quality is sacrificed for faster transmission.



  • The frame rate settings, which control how many frames per second are displayed in the remote session.



  • The bandwidth limit settings, which control how much bandwidth is allocated for the remote session.



  • The cache size settings, which control how much disk space is used for caching data in the remote session.



You can adjust these settings from the "Performance" console, which you can access by running the following command:


sudo /usr/NX/bin/nxserver --performance


You can also adjust these settings from the client side, by clicking on the menu icon in the top left corner of the client window or the web player and selecting "Change Settings".


How to Troubleshoot Linux Nxd 7.5 Terminal Server




If you encounter any problems or issues with your Linux Nxd 7.5 terminal server, you can use the following tools and methods to troubleshoot and resolve them:


How to Check Server Status and Logs




You can check the status and logs of your Linux Nxd 7.5 terminal server by running the following commands:


# To check the status of the server


sudo /usr/NX/bin/nxserver --status


# To check the logs of the server


sudo /usr/NX/bin/nxserver --log


The status command will show you if the server is running or not, and if there are any errors or warnings. The log command will show you the detailed information about the server operations and events.


How to Restart Server Services




If you need to restart any of the server services, such as the nxserver, nxnode, nxclient or nxwebplayer services, you can use the following commands:


# To restart a specific service


sudo /usr/NX/bin/nxserver --restart SERVICE


# To restart all services


sudo /usr/NX/bin/nxserver --restart all


Replace SERVICE with the name of the service you want to restart.


How to Contact NoMachine Support




If you cannot solve your problem or issue by yourself, you can contact NoMachine support team for assistance. You can do so by using one of the following methods:


  • Visit NoMachine support page and submit a support request form.



  • Send an email to support@nomachine.com with your problem description and relevant information.



  • Call +1 (212) 652-3100 (USA) or +39 011 234-4567 (Italy) and speak to a support representative.



Before contacting NoMachine support team, make sure you have the following information ready:


  • Your license key and product version.



  • Your Linux server and client specifications and configurations.



  • Your network topology and settings.



  • Your problem description and steps to reproduce it.



  • Your server logs and screenshots if possible.



Conclusion




In this article, we have shown you how to install and configure Linux Nxd 7.5 on your Linux server and connect to it from your clients by browsers or by NoMachine client. We have also shown you how to manage and optimize your terminal server settings and performance, and how to troubleshoot and resolve any problems or issues. Linux Nxd 7.5 is a powerful and easy-to-use terminal server software that enables you to access remote desktops and applications from any device and browser. It is based on NoMachine technology, which provides high-performance, secure and easy-to-use remote access solutions.


If you want to learn more about Linux Nxd 7.5 features and functionalities, you can visit NoMachine Terminal Server product page or NoMachine documentation page.


Conclusion




In this article, we have shown you how to install and configure Linux Nxd 7.5 on your Linux server and connect to it from your clients by browsers or by NoMachine client. We have also shown you how to manage and optimize your terminal server settings and performance, and how to troubleshoot and resolve any problems or issues. Linux Nxd 7.5 is a powerful and easy-to-use terminal server software that enables you to access remote desktops and applications from any device and browser. It is based on NoMachine technology, which provides high-performance, secure and easy-to-use remote access solutions.


If you want to learn more about Linux Nxd 7.5 features and functionalities, you can visit NoMachine Terminal Server product page or NoMachine documentation page. ca3e7ad8fd


About

Support Local and Friendly Businesses Recommended by Montana...
bottom of page